41
accumulator’s life span.
3
To dismantle battery ,disconnect the
negative(-)electrode before the po)one, and vice
versa in installation .Ensure against any contact of the
po)electrode with the vehicle body.
4
Never have the electrolyte level come over the upper
mark line when adding distilled water .Otherwise
overflow and corrosion will occur.
5
The electrolyte contains sulfuric acid and will cause
serious hurt to skin and eyes by contact. In case of
contact with it, wash it off for 5 minutes and see a doctor
immediately.
6
Foreign matter should be prevented from entering into
the battery during dismounting and installation.
7
The breathing pipe must be kept unblocked.
13. Replacement of fuse
Set the ignition switch to
“OFF” position. The specified fuse
tube of 15A should be used for main fuse replacement, and a 10A
fuse tube for FAI injection nozzle.
Open the left side cover, remove the fuse holder on the side of
the battery and replace the fuse tube.
If the new fuse tube is broken again as soon as it is fitted on, it
means that somewhere of the electric parts is shorted
unexpectedly.
Caution
Do not use any fuse over 15A/10A.
Be sure not to wash the battery when washing the
vehicle.
Negative (-) Connector
Positive (+) Connector
Fuse