Mash TT40 Cafe Racer, User Manual

Page: 35 / 52

35
Air filter
This adjustment is absolutely
necessary on new two-wheeled
vehicles at the end of their running-
in period (first 1000 km).
Check-up, cleaning of Air Filter
Take out the air filter and check if it is contaminated.
Dismounting:
Open the right side cover. Remove the right side cover screw of the filter, open
the right cover and disassemble the air filter.
Cleaning:
Wash the filter in clean washing oil and wipe it dry with dry cloth.
Caution:
The air filter element for use must be intact or the engine will suck in dust and
dirt, resulting a shorter service life of the engine.
Water should be prevented from entering into the filter in washing the vehicle.
The filter shall never be cleaned with gasoline or any other agent of a low
ignition point.
Access to
tumblers
Cylinder
head
Plug with
crankshaft
Top dead
center mark
The valve clearance should be
inspected and adjusted by a Mash
Dealer.
The specified valve clearance is :
0.07-0.10mm for intake valve and
0.08-0.12mm for exhaust valve
respectively.
If clearance adjustment is needed,
please contact your Mash Dealer.
Air cleaner cover