Mash SIDE FORCE 445cc, User Manual

Page: 4 / 27

6 7
Back to summary
Foreword
Confratulations on your choice!
If riding a sidecar is one of the most exciting hobbies. This vehicle is also an ideal
means of transport, which guarantees you unlimited driving pleasure. Before driving,
you are encouraged to familiarize yourself with the instructions and specifications
in this instruction manual, which describes in particular the rules for using and
maintaining the vehicle.
Observing the following recommendations will ensure the reliability of your sidecar
and prolong its life.
The staff of MASH authorized dealers (list available by consulting the website
www.mash-motors.fr) have the skills and technical qualifications required to carry out
maintenance and provide quality service.
DISTRIBUTEUR
ENGINE NUMBER
CHASSIS NUMBER
Chassis number (or VIN code) and engine number is necessary for registration of
your motorcycle. Such numbers are needed with order components or service, to
allow the distributor to provide you with better service.
Chassis number (or VIN code) is on the riser pipe of chassis. Engine number
is on the left side of crankcase. Metal nameplate is on the riser pipe of chassis,
showing the main technical parameters, manufacturer and date of production
of the motorcycle.
Write the numbers in the spaces below, for future reference.
Contents
I Main technical data........................................................................................8
II User Instruction .............................................................................................10
III Installation position of parts...........................................................................12
IV Ignition switch.................................................................................................15
V Control system.................................................................................................16
VI Essentials of driving.........................................................................................18
VII Controls and setting........................................................................................23
VIII Inspection and maintenance...........................................................................29