Mash SIDE FORCE 445cc, User Manual

Page: 8 / 27

14 15
9
3
4
7
2
2
5
6
8
5
1
Back to summary
Use and reading of the meter
1. Speedometer:
Indicates the speed of the sidecar (Km/h). Do not exceed the maximum
allowed speed.
2. Turn Signals:
Flashes when a turn signal is activated
3.. High beam warning light
Comes on when the light is in the driving position
4. Tachometer:
Indicates engine speed (tachometer)
5. Fuel Level Indicator:
Indicates fuel level and illuminates when fuel level is low
6. Total or trip odometer
Indicates trip mileage, ability to switch from daily mileage (TRIP) to total mileage (ODO) by
pressing the button on the left side of the meter
A long press switches from Miles to Kilometers and vice versa.
7. Engine Light
Comes on when there is an engine malfunction. If this warning light comes on on the
speedometer, it is necessary to go to an authorized Mash dealer in order to carry out a
diagnosis.
8.Battery Indicator:
Indicates battery charge level
9. Indicates neutral
Interrupteur principal utilisé pour démarrer ou couper le moteur.
Position Function
Position (OFF) All circuits are off: the key can there -
fore be removed.
Position (ON) All the electrical circuits are live: the
engine can therefore be started. The key cannot be
removed.
To lock the steering, turn the handlebar to the left,
insert the key, then turn the handlebar n fully clock-
wise
Caution
Do not change the key position while driving.
The engine and the sidecar must be stopped before removing the key.
ON position
When the switch is in this position, the front light, the front position light, the
instrument cluster lighting and the rear light are on.
OFF position
When the switch is in this position, the front light, front position light, instrument
cluster lighting and rear light are all off.
IV - Ignition switch