3
94
Internal outfits
HomeLink (optional)
This system allows you to control
automatic gate and garage door
opening devices, as well as lighting or
alarm systems from inside the vehicle.
It is programmable directly on the
transmitting station by means of the
original remote controls for the
devices to be controlled, and is
compatible with the existing systems.
The control and programming panel is
composed of three buttons: M, N, O
and a LED P.
Customer Service
If you have any problems with
configuring and programming the
HomeLink system or if you would like
to know what devices can be
connected to it, call the toll-free
number 008000 466 345 65 or visit the
Web site ww.eurohomelink.com .
Safety Precautions
For using the HomeLink feature,
follow the instructions and safety
indications given in the User Manual
that the manufacturer must provide
together with the device to be
controlled. If you do not have this
manual, request it from the supplier.
Before opening or closing a gate or
door make sure that the procedure can
be performed in thorough safety, i.e.
make sure that you can see the whole
range of action of the gate or door and
also check that there are no persons,
animals or other objects within this
range.
General information
While programming HomeLink, it is
advisable to disconnect the drive
motor of the gate/door to be remote-
controlled, since the numerous driving
pulses launched for this operation
might damage it.
If the battery fails or is disconnected,
the stored settings are not deleted.
If the gate/door was manufactured
prior to 1982 (not equipped with
safety systems or automatic stop in the
event of an obstacle in the range of
action), the gate/door cannot be
controlled by HomeLink.
For more information in this regard,
please contact the Customer Service.
M
N
O
P
M139_UM_ing.book Page 94 Friday, September 5, 2008 8:19 AM
Summary of Contents for Quattroporte Automatic
