Maserati Gransport, Owner'S Manual

Page: 71 / 210

4
Keys
71
4) Wait until the number of flashes is
the same as the first digit on the CODE
CARD and then press the accelerator
pedal down and keep it pressed until
the warning light
OBDII switches
off, after being lit for about 4 seconds,
then release the accelerator.
5) The warning light OBDII will
start flashing again. As soon as the
displayed number of flashing is equal
to the second digit of your CODE
CARD, press down the accelerator
pedal and keep it pressed.
6) Proceed in the same manner for the
remaining digits in the code on the
CODE CARD.
7) When the last digit has been
entered, keep the accelerator pedal
pressed down. The warning light
OBDII
will switch on for 4 seconds and
then switch off; release the
accelerator.
8) Rapid flashing of the warning light
OBDII (for about 4 seconds)
confirms that the procedure has been
completed.
9) Start the engine by turning the key
to position MAR .
If the warning light OBDII remains
on, turn the key to position STOP and
repeat the procedure from step 1 .
WARNING: After an emergency start-
up procedure, we advise you to contact
your
Authorized Maserati Dealer since
the emergency procedure must be
performed after each start.