6
146
If an interior light goes out
If an interior light
goes out
WARNING: Before replacing a lamp,
make sure that the corresponding fuse
is in good working condition. Use only
new and original bulbs having the
same features as the older ones for
replacement.
Front overhead lights
To replace the bulbs:
1)
Remove the overhead light by
gently levering it out with a flat head
screwdriver at point
A
.
2)
Replace the bulb concerned:
– timed light
B
(12V – 10W torpedo)
– reading light
C
(12V – 3W).
3)
Refit the overhead light inserting
the left-hand side first and then
pushing the right-hand side into place.
WARNING: When refitting the
overhead light, make sure that the
electric wires are correctly arranged
and do not interfere with the edges of
the overhead lights or its retaining
tongues
Rear overhead lights
To replace the bulb (12V – 5W
torpedo):
1)
Remove the ceiling light by gently
levering it out with a flat head
screwdriver at point
D
.
2)
Replace the bulb.
3)
Refit the ceiling light inserting the
connector side first and then pressing
on the other side until it fits into place.
A
B
C
D
Summary of Contents for Gransport
