manualshive.com logo in svg

Maserati Gransport, Owner'S Manual

Share
Download
Maserati Gransport Owner'S Manual Download Page 66

4

66

Engine compartment hood

Engine compartment 
hood

To open the engine compartment 
hood: pull lever 

A

 located on the lower 

left hand side of the dashboard.

WARNING: If necessary, the engine 
compartment hood can be released by 
pulling the eyelet on the emergency 
cable found near the lever.

Release the safety device by lifting 
button 

B

 located in the middle of the 

grille.
Lifting the engine compartment lid: 
The procedure is facilitated by the side 
gas struts. 
The engine compartment lid positions 
itself at the maximum opening 
position and does not require support 
stays.
To close the engine compartment lid: 
lower it to about 8 in (20 cm) from the 
engine compartment and let it drop; it 
closes automatically.

Always check that the hood is 
properly shut so that it cannot 
open while the car is moving.

A

B

B

Summary of Contents for Gransport



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands