Maserati Ghibli, Owner'S Manual

Page: 90 / 308

Driver Memory Seat (for
versions/markets, where
provided)
This feature allows the driver to store
up to two different memory profiles
for easy recall through a memory
switch. Each memory profile contains
desired position settings for the driver
seat, external side mirrors, adjustable
pedals (for versions/markets, where
provided), and power tilt and
telescopic steering column and a set of
programmed radio stations.
Your key fob RKE transmitter can also
be set to recall the same positions by
pressing the
button.
NOTE:
• Only one key fob RKE transmitter can
be linked to each of the memory
positions.
• Passive Entry door handles cannot be
linked to the memory function. Use
either the memory recall switch or
the key fob RKE transmitter (if linked
to the memory feature) to recall
memory positions 1 or 2.
The memory seat switch is located on
the driver's door trim panel. The
switch consists of three buttons:
• The “S” (SET) button, which is used
to activate the memory save
function.
• The “1” and “2” buttons which are
used to recall either of two
programmed memory profiles.
Memory Profiles Setting
NOTE:
Saving a new memory profile will
erase an existing profile from memory.
To create a new memory profile,
perform the following:
• Cycle the ignition switch to the RUN
position.
• Adjust all memory profile settings to
desired preferences (i.e., seat, side
mirrors, adjustable pedals, power tilt
and telescopic steering column, and
radio station presets).
• Press and release the “S” button on
the memory switch.
• Within five seconds, press and
release the MEMORY button “1” or
“2”. The instrument cluster display
will show which memory position has
been set.
NOTE:
Memory profiles can be set without
the vehicle in P (Park), but the vehicle
must be in P (Park) to recall a memory
profile.
Pairing Remote Keyless Entry
Transmitter to Seats Memory
Your key fob with RKE transmitters can
be programmed to recall one of two
programmed memory profiles by
pressing the
button on the RKE
transmitter.
To program your key fobs RKE
transmitter, perform the following
actions:
1. Cycle the ignition switch to the
OFF position.
2. Select the desired memory
profile that you wish to activate
from the transmitter by pressing
the button “1” or “2”.
Understanding the Vehicle
3
88