Maserati Ghibli, Owner'S Manual

Page: 205 / 308

When the CC is activated, if the driver
presses the accelerator pedal to
overtake another vehicle and exceeds
the set speed limit, the system
temporarily deactivate the speed
regulator. A message pops up for 5
seconds on the display to alert the
driver.
When the accelerator pedal is
released, the vehicle will return to the
set speed.
When the SL is activated, if the driver
exceeds the set speed limit, a message
pops up for 5 seconds on the TFT
display to alert the driver.
In this case, reduce the speed to return
to the maximum set value.
Speed Limiter Setting (SL)
With the SL function activated, push
down and release the (SET-) control:
the system sets and visualizes the
current speed limit (in the example
shown 30 km/h).
To increase the speed limit by single
units, push the (RES+) control upward,
to reduce it, push the (SET-) control
downward. Keep the control pressed
to obtain 5-unit increases or
reductions of speed.
The new speed value is visualized in a
message and on the related light
during setting – it will disappear after
5 seconds of inactivity.
Driving
5
203