Maschio WEEKEND WARRIOR 6042, Use And Maintenance

Page: 26 / 46

A
RH
LH
B
C
cod. F07011720
26 - EN
Service intervals
Every 50 working hours / Weekly:
• Tighten mast brackets bolts.
• Tighten skid shoe bolts.
• Slip clutch inspection at beginning of every season.
Replacing tines
CAUTION: To prevent injury: Wear heavy gloves when replacing tines.
To get the best performance from your tiller:
• Replace badly bent, worn, or broken tines immediately.
• Replace worn or broken hardware (see your Maschio dealer for correct hardware).
• MAKE SURE to replace tines on ONE spindle at a time to keep spiral tine pattern.
• Tine cutting edge MUST BE facing forward in direction of tine rotation.
CAUTION: Make sure you block tiller before doing any service on the tiller.
• STOP engine. • LOCK park brake. • FIRMLY block tiller on horizontal surface.
Tines can be changed with the tiller mounted on tractor. Make sure you block the tiller before doing any
service on the tiller.
SERVICE
Tines
Before replacing tines make sure the tiller is fi rmly
blocked.
The tines with which the rotary tiller is equipped can work
soils of normal conformation. Check the degree of wear
and condition of the tines each day. If the tines should
accidentally bend (or break) during work, they must be
immediately replaced.
First - Identify tines:
Remember to mount the new tine in exactly the same
position as the old one (A). If several tines must be re-
placed, it is advisable to remove and assemble one tine
at a time in order to prevent positioning errors.
The tillers are equipped with 6 tines per fl ange.
Second - Install New Tines:
1. Raise tiller with a safe lifting device.
1. Put safety stands or blocks under tiller.
3. Stand facing rear of tiller and study placement of tines.
4. Remove four bolts, lock washers, and nuts (C).