Maschio WEEKEND WARRIOR 6042, Use And Maintenance

Page: 12 / 46

A
A
C
C
B
D
WW 6042 - 6042R - 6049 - 6049R - 6062 - 6062R
cod. F07011720
12 - EN
Preparing the tractor
CAUTION: Avoid injury. Proper ballastings is required for safe operation of your tiller
IMPORTANT: Refer to the tractor operator manual for proper ballasting information and tire in fl ation
• A 540 rpm PTO
• Refer to the tractor operator manual for correct ballasting and tire pressure, depending on installed equipment.
PREPARING THE VEHICLE
Park vehicle safety
• Stop vehicle on a level surface, not on a slope.
• Disengage PTO.
• Engage the park brake.
• STOP the engine.
• Remove the key.
• Before you leave the operator’s seat, wait for engine
and all moving parts to STOP.
Stay clear of rotating drivelines
Entanglement in rotating driveline can cause serious
injury or death:
• Wear close fi tting clothing.
• STOP the engine and be sure PTO driveline is stopped
before getting near it.
Installing tiller on tractor
1. Back tractor into position and align draft links (A) with
draft link brackets on tiller using tractor rockshaft con-
trol.
CAUTION: Before you work around hitch:
• STOP engine.
• LOCK park brake.
• FIRMLY block tiller on horizontal surface.
Locate hitch pin in holes (B).
WW 6042 - 6042R - 6049 - 6049R - 6062 - 6062R
model (Cat. I Std. 3-Point Hitch):
2. Fasten each draft link (A) to draft link brackets with
hitch pins and quicklock pins (C).
Locate hitch pin in top hole (H).
WW 6042 - 6042R - 6049 - 6049R - 6062 - 6062R
model (Cat. I Std. 3-Point Hitch):
3. Install center link (G) on tiller and fasten with hitch
pin and quicklock pin (L).
4. Install PTO shaft to tractor.
Locate hitch pin in holes (B).
WW 6042 - 6042R - 6049 - 6049R - 6062 - 6062R
model (Cat. I Quick Coupler):
2. Insert bushings (D) in each draft links then fasten