© Maschinenfabrik Reinhausen 2009
2226817/00 EN
TAPCON
®
-trol
4 Basic settings
27
4
Basic settings
Once the software has been installed, the basic settings need adapting. The fol-
lowing sections describe how to do this.
4.1
Selecting language
You can select the language you want from all languages currently imple-
mented in the "Language" window shown below. This is done using a list func-
tion.
Proceed as follows to select the language:
1. Settings > Paths > Language
2. Select the language you want from the list function.
3. Press the "Apply" button to confirm.
Since standard Microsoft operating system dialogs are sometimes used, the
language cannot be changed in some dialogs. Such cases include:
• Setting up the printer
• Navigation when searching for directories
• Navigation when searching for files
• The manual communication interface setting
The current language set for the Microsoft operating system is used.
Figure 9
Selecting language
