Assembling: Reassembling the steering crown unit / arch-slider assembly
A special spanner shall be used to assemble the bottom nuts. Do not, at any times, use other
tools.
Fit both dust seals (
11
) to the stanchions.
Insert the crown-stanchion unit (
3
) in the arch-slider assembly (
4
).
Using the 5mm Allen wrench, tighten the bottom screw (
1
) complete with washer (
2
) to the
recommended tightening torque (
10 Nm ± 1
).
Using introducer (
A
) insert the dust seals (
11
) in their seats.
Assembling: Assembling spring and elastomer
Block the fork in the vice, in perfectly vertical position.
Smear both springs with the recommended grease.
Lift the crown-stanchion unit on the arch-slider assembly.
Insert the bottom spring cup (
4
), spring (
3
),elastomer (
2
) and the top spring cup (
1
) in both legs.
© Marzocchi Suspension
2006
-
MZ II
