Use the special spanner to remove the bottom nuts. Do not use other tools.
Turn the arch-slider assembly upside down.
Using the special 12mm spanner (
A
), loosen the bottom nuts (
1
) of both legs.
Pull the bottom nuts (
1
) complete with O-rings (
2
) out of both legs.
Pull the crown-stanchion unit (
3
) off the arch-slider assembly (
4
).
Dismantling: Removing the right pumping element
Remove the bottom pad (
1
).
Pull out the pumping element (
3
), the preload tube (
9
) (
only for models with 110 - 130mm travel
) and
the rebound spring (
7
).
If the piston segment (
8
) is damaged, you can prize it off with a small flat-tip screwdriver.
Dismantling: Removing the left pumping element
© Marzocchi Suspension
2006
-
Drop-Off SL
