Fit the bottom pad (
1
) to the end of the pumping element rod.
Assembling: Reassembling the steering crown unit / arch-slider assembly
A special spanner shall be used to assemble the bottom nuts. Do not, at any times, use other
tools.
Fit both dust seals (
11
) to the stanchions.
Insert the crown-stanchion unit (
3
) in the arch-slider assembly (
4
).
Fit washer (
6
) and O-ring (
7
) on the bottom screw (
5
) of both legs, then tighten to the recommended
tightening torque (
10 Nm ± 1
) with the 5mm Allen wrench.
Using introducer (
A
) insert the dust seals (
11
) in their seats.
© Marzocchi Suspension
2005
-
Dirt Jam Comp
