Assembling: Assembling the guide bushes
Insert the guide bushes using the special introducers (short type for the top bush and long type for the bottom bush, both with a
white finish). Do not use other tools.
Fit first the bottom bushes, then the top bushes.
Using the long introducer (
A
) fit the bottom bush (
1
).
Using a hammer knock the introducer (
A
) into the arch-slider assembly.
Using the short introducer (
B
) fit the top bush (
2
).
Using a hammer knock the introducer (
B
) into the arch-slider assembly.
Smear the guide bushes with the recommended grease.
Assembling: Assembling the seals
Insert the spring cup (
4
) in its seat.
© Marzocchi Suspension
2005
-
Dirt Jam Comp