With the same screwdriver, prize off the metal stop ring (
2
).
Take great care not to damage the internal surfaces of the one-piece assembly while
removing the stop ring.
Protect the upper part of the slider with the special tool (
A
).
With a screwdriver, prize off the sealing ring (
3
).
Remove the sealing ring (
3
).
Take great care not to damage the internal surfaces of the one-piece assembly while
removing the sealing ring.
Remove the spring cup (
4
).
The old sealing rings and dust seals must not be used again.
Dismantling: Removing the guide bushes
Knock the top end of the one-piece assembly against a wooden surface and remove the top guide bush
(
1
), spacer (
2
) and the bottom guide bush (
3
).
Do this operation with extreme caution and hold the one-piece assembly perpendicular to the
wooden surface.
© Marzocchi Suspension
2005
-
888 VF