Do not, at any times, reverse the position of the pumping elements in the fork legs (if you are unsure about anything, please refer
to the relevant exploded view).
Assembling: Assembling the left pumping element and valve
Replace the segment (
8
) of the pumping element, if necessary.
Insert the rebound spring (
7
) and the preload tube (
9
) (
only for models with 170mm travel
) in the piston
rod.
Assemble the valve unit in this order: bushing (
4
),valve (
5
), conical spring (
11
), three-point ring (
6
), and
check that the parts are oriented as shown.
Insert the pre-assembled valve in the piston rod from the three-point ring side as shown.
Insert the valve and the pumping element (
3
) into the stanchion.
Take great care not to damage the segment and if necessary use a small flat-tip screwdriver to help the piston of the pumping
element into the stanchion.
Using the special round-nose pliers, mount the stop ring (
2
) and check it fits perfectly into its groove.
Fit the bottom pad (
1
) to the pumping element rod.
© Marzocchi Suspension
2005
-
888 VF
