2022-09-08
3
Sliding Door Automatic Control Device
19916437
Installation Instructions
Wiring Prep
Wiring Included
The following supplies are included with your motor but may be supplied locally. If CAT5e cables are locally supplied
they MUST be shielded.
• 18" system power cable
• 100’ 14-2 motor power cable (cable crimps
included)
• 100’ and 10’ of red CAT5e "Super Cable"
• 75’ and 10’ of blue CAT5e cable
• 25’ of yellow CAT5e cable
Wiring Diagram
Figure 3
1
Motor
2
Control Box
3
110 volt outlet dedicated 15 amp circuit
4
Power cable from outlet to control box (if recessed, the control box must be hardwired).
5
Sensor 1
6
Sensor 2
7
Interior wall switch
8
Exterior wall switch
9
14-2 Power cable run from control box to motor.
10
Red CAT5e “Super Cable” run from the control box to motor.
11
Blue CAT5e cable ran from the interior and exterior wall switches to the motor or controller. (Can be daisy chained)
12
Yellow CAT5e cables ran from each sensor to the motor.
13
Power cable is supplied
