4
Key capabilities:
−
Distance between neighboring beacons: up to 50 meters. Recommended distance in real-life
environment – up to 30m *
−
Coverage area:
o
Up to 1000
㎡
for Starter Set
o
Coverage for larger areas is done similar to cellular networks; can be much larger, than
1000
㎡
and depends on the radio interface that can be further extended
−
Location precision:
o
1-3% of the distance to the beacons (without calibration)
o
Differential precision:
±2 cm
−
Location update rate:
o
0.5-45Hz
Can be set manually
Depends on the distance between mobile beacon and stationary beacons (smaller
distance – higher update rate)
Depends on the number of beacons
−
Beacons form the navigation system automatically – no manual coordinates measurements or
entering required (except of height)
* Sensor 4 to sensor 4 direct line; all other sensors are disabled
Parameter
Technical Specifications
Distance between beacons
Up to 50 meters; Recommended - 30 meters (Transducer4 to Transducer4 looking
straight to each other and other transducers are off)
Coverage area
Up to 1000 m
2
for Starter Set configuration
Coverage for larger territories done similar to cellular networks
Location precision
-
Absolute: 1-3% of the distance to the beacons
-
Differential precision:
±2 cm
Power supply
Internal: LiPol battery 1000mAh
External: microUSB
Weight
Mobile beacon from Starter set:
-
55 grams (including battery 1000mAh and housing)
-
27 grams (bare board w/o battery)
Beacon size
Size: 55x55x33 mm (with antenna: 55x55x65mm)
