15
4.2.14 Turn on and wake up mobile beacon similar to the operations with the stationary beacon:
https://youtu.be/A4aRsjH2-_E
4.2.15 If you see on the devices’ panel beacon colored
orange
(see pic. #1) it means some settings
between beacons are different, for example: some sensors are off or some ultrasonic or radio
settings are different. You can change the settings for sensors manually by clicking on the panel
in the right corner of the dashboard and make grey cells green to turn on sensor. But for starting,
it is very much recommended to use default settings on all beacons
4.2.16 After you froze the map of stationary beacons, wake up the mobile beacon. After it wakes up, it
will be traceable in 5-7 seconds
4.2.17 By now, the system must be fully operational
