MM200-M MiniCard
Field Description
Extension Channel
Sets the extension channel mode when bandwidth is 40 MHz.
Available options are
Auto, None, Lower, and Upper. The default is Auto.
Antenna Selection
Sets the antenna selections. Available options are Auto, An-
tenna A, Antenna B, 2 by 2,
and 2 by 3. The default is Auto.
Note
The fields
Wireless Mode
and
Preferred Channel
are used only when an Ad-Hoc network is started by the
client card. These two attributes are ignored if the client card is connected to an existing Ad-Hoc network with
the same desired SSID.
3.2.2 Profile Setting—Security Tab
Clicking the
Security
tab displays the following security options:
.
•
Authentication Mode
.
•
Encryption Mode (Security off, WEP, TKIP, and AES)
.
•
WEP Key Setting (Passphrase Key or Authentication Protocol)
Figure 12
ˍ
Security tab
3.2.2.1 Non-EAP Authentication Modes
The MM200-M Configuration Utility currently supports the following non-EAP authentication modes:
.
•
Open System—Open Authentication (no key or a pre-shared WEP key is
. required).
.
•
Shared Key—Shared Authentication (a pre-shared WEP key is required)
.
•
Auto Switch—Auto Select Authentication modes (Open System or Shared
.
Key, WEP key required)
.
•
WPA-PSK—WPA Pre-Shared Key
.
•
WPA2-PSK—WPA2 Pre-Shared Key
12
