manualshive.com logo in svg

Marvell MM200-M, User Manual, Page: 13 / 36

Share
Download
Marvell MM200-M User Manual Download Page 13

MM200-M MiniCard

ʳ

3.2 Profile Manager Tab 

The

Profile Manager

 tab displays the profiles available and allows you to create, modify, and delete profiles.

Figure 10: Figure 14: Profile Manager Tab 

Note

The Profile Manager tab is not accessible when Windows Zero Configuration Utility is enabled.

PROFILE MANAGER—PROFILE LIST 

The section on the left side of this tab lists all of the profiles available. Highlighting a profile selects it. If the 
check box next to the profile is selected, that profile is used in auto-configuration mode when the link is lost. If 
it is not selected, that profile is excluded in auto-configuration. The buttons associated with this window are as 
follows.

Table 4: Profile List Section Description 

Button

Description 

Apply Profile  

Applies the profile selected.
Apply the profile by double-clicking the desired profile.  

Move Up / Down  

Moves the list up and down in the window.  

All profiles with the Network Type set to Infrastructure are dis-
played before the profiles with the Network Type set to Ad-Hoc. 
In auto-configuration mode, the selected profiles at the top of 
the list have higher priority than selected profiles at the bottom 
of the list.

Delete

Deletes a profile

Create

Creates a profile

Save

Saves changes made to a selected profile

10

Summary of Contents for MM200-M





































Reviews:

No comments