File Systems and Partitions
New Boot Card Setup
Copyright © 2010 Marvell
Doc. No. MV-S400320-00 Rev. -
December 2010
Page 37
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
14. The root file system archive must be extracted to the EXT3 partition now mounted at
/media/plug_rootfs. Make this the working directory by entering “cd/media/plug_rootfs”
(
).
15. Extract the contents of the root file system archive with “sudo tar –xvjf
/cdrom/gplugD/gplugD_rootfs_v0.3.tar.bz2.” Use the appropriate file name if a new release of the
gplugD root file system has been made available. Version 0.3 of the root file system is about
470 MB and, depending upon the write speed of the microSDHC card used, it may take around
10 minutes to extract all of the files (see
).
16. When all of the files have been extracted, the SD card must be safely removed from the reader.
If using an integrated SD card reader, launch the Disk Utility (see Step 11), unmount the FAT16
and EXT3 partitions, and eject the card from the reader. USB card readers can be disconnected
by right-clicking on either the plug_kernel or the plug_rootfs icon and selecting Safely Remove
Drive (see
).
Figure 40: Change Directory to the ext3 Partition for the Root File System
Figure 41: Decompress and Extract the Root File System Tarball
