30
MV01-94000-00
Rev C
Adjusting Center of Gravity
1.
Rider must be out of the wheelchair.
2.
Turn the wheelchair upside down.
3.
Remove the wheels. (See instructions entitled “Removing Wheels”) Measure Center
of Gravity (CG) with a Square. Center of gravity is measured from the centerline of
the rear axle, to the front edge of the Seat Back Post. Positive CG is when the Seat
Back Post extends rearwards of the rear axle. Negative CG is when the Seat Back
Post extends forward of the rear axle.
4.
Using a 5mm Allen Wrench (Key), loosen, but do not remove, the four bolts (two on
each side) attaching the shock to the tracks on the seat section.
5.
AND using a 5mm Allen Wrench (Key), loosen, but do not remove, the four bolts