23
MV01-94000-00
Rev C
3.
Loosen left and right Footrest Adjusters by turning counterclockwise.
4.
Adjust Footrest to desired height by sliding Footrest through Footrest Adjuster
Clamps. If required, use a mallet to gently tap the Footrest into position.
5.
WARNING: Make sure the Footrest Adjuster Clamp is fully engaged with the Footrest
Posts. Failure to heed these warnings could cause damage to your wheelchair, injury
to yourself, a fall, a tip-over and/or loss of control, causing severe injury to yourself
or others.
6.
WARNING: Use “Threadlocker Loctite 242” to lock threaded fasteners against
vibration loosening. Threadlocker Loctite 242 allows for fasteners to be removed
with hand tools. Tighten both (2) Footrest Adjusters by turning clockwise. (Tighten
to six newton meters (Nm) or five foot pounds). Failure to heed these warnings could
cause damage to your wheelchair, injury to yourself, a fall, a tip-over and/or loss of
control, causing severe injury to yourself or others.
7.
WARNING: Ensure the footrest posts are no more than 1.2 cm (0.5”) above the
caster wing. Using a pipe cutter, carefully cut excess tube, and replace caps in the
top of the footrest tubes. Failure to heed these warnings could cause damage to
your wheelchair, injury to yourself, a fall, a tip-over and/or loss of control, causing
severe injury to yourself or others.