12
Step2
：
Strip the wire skin 12.0 + 0.5 / - 0mm
Step3
：①
Crimping terminal
：
Refer to the right figure for dimensions 25mm ² Riveting size requirements.
②
3.5-4mm shall be reserved at the front end of the crimping hole without pressure riveting, and the
tail shall be flattened. The pressure shall be maintained for 2 seconds during crimping.
Step4
：
Install the riveted terminal into the plug body.
Step5
：
Install the upper cover of the plug into the plug body
Step6
：
Install the sheath into the plug body and complete the assembly.
Tips:
The holding force of the harness after riveting is 25mm ²
≥
1900Nmin
；
If the holding force is
insufficient or the terminal is excessively extended, please adjust the riveting size appropriately.
25mm riveting size