background image

20

CARE AND CLEANING

Cleaning

EXTERIOR CLEANING

Black Models

Clean surfaces with a mild detergent and warm water solu-
tion. Do not use solvent-based or abrasive cleaners. Use 
a soft sponge and rinse with clean water. Wipe with a soft, 
clean towel to prevent water spotting.

Clean any glass surfaces with a non-chlorine glass cleaner.

Stainless Models

Stainless door panels, handles and frames can discolor 
when exposed to chlorine gas, pool chemicals, saltwater or 
cleaners with bleach.

Keep your stainless unit looking new by cleaning with a 
good quality all-in-one stainless steel cleaner and pol-
ish monthly. For best results use Claire® Stainless Steel 
Polish and Cleaner. Comparable products are acceptable. 
Frequent cleaning will remove surface contamination that 
could lead to rust. Some installations may require cleaning 
weekly.

Do not clean with steel wool pads.

Do not use stainless steel cleaners or polishes on any 
glass surfaces.

Clean any glass surfaces with a non-chlorine glass cleaner.

Do not use cleaners not specifically intended for stainless 

steel on stainless surfaces (this includes glass, tile and 
counter cleaners).

If any surface discoloring or rusting appears, clean it 

quickly with Bon-Ami® or Barkeepers Friend Cleanser® 

and a nonabrasive cloth. Always clean with the grain. Al-

ways finish with Claire® Stainless Steel Polish and Cleaner 

or comparable product to prevent further problems.

Using abrasive pads such as ScotchBrite™ will cause the 

graining in the stainless to become blurred.

Rust not cleaned up promptly can penetrate the surface of 

the stainless steel and complete removal of the rust may 

not be possible.

INTERIOR CLEANING

Disconnect power to the unit. 

Clean the interior and all removed components using a mild 

nonabrasive detergent and warm water solution applied 

with a soft sponge or non-abrasive cloth. 

Rinse the interior using a soft sponge and clean water.

Do not use any solvent-based or abrasive cleaners. These 

types of cleaners may transfer taste to the interior products 

and damage or discolor the interior.

Summary of Contents for MACR214-BS01A

























Reviews: