19
CLEANING YOUR ICE MACHINE
Ice Maker Adjustment
Ice Cube Thickness Adjustment
Interval - As Required
On ice maker equipped models, adjust the cube size by
changing water amount injected into the ice maker assem-
bly as follows:
1. Remove the ice maker assembly cover (1).
2. Find the adjusting screw on the ice maker assembly
control box (2). The adjusting screw is just below the minus
(-) and plus (+) signs on the control box.
Too large of an adjustment to the screw can cause the
water to overflow the ice maker and can cause property
damage.
3. Turn the adjusting screw toward the minus (-) sign
(clockwise) for smaller cubes or toward the plus (+) sign
(counterclockwise) for larger cubes.
4. Install the ice maker assembly cover.
Figure 41
!
CAUTION
Adjusting Ice Harvest
1. Remove the front grille
2. Using a flat tip screwdriver, turn the adjusting screw
(3) a small increment clockwise for a COLDER setting
(slower ice production) or counterclockwise for a WARMER
setting (faster ice production).
3. Reinstall the front grille (one screw).
Figure 42
Airflow and Product Loading
The unit requires proper airflow to perform at its highest ef
-
ficiency. Do not block the front grille at any time, or the unit
will not perform as expected. Do not install the unit behind
a door.
NOTE
Figure 43
