5. Remove bottom hinge from cabinet (two screws).
Replace screws in cabinet.
6. Remove screws on opposite side at bottom of cabinet.
7. Install hinge. Align hinge outer edge with cabinet
Do not tighten screws all the way.
8. Remove screws from top of cabinet.
9. Use the 3 screws to attach hinge to top of cabinet—
long, straight edge of hinge should align to the outside
edge of cabinet.
Do not tighten screws.
Rotate the door 180
0
and set onto bottom hinge - lift top
hinge enough to allow door to pass under it.
Push hinge down to insert pivot screw into hole in the top of
door. Tighten screws enough to safely hold the door in
place.
Check that the door is square to the cabinet and tighten all
screws.
Align and adjust the door:
Align and adjust the door (see ALIGNMENT AND
ADJUSTMENT).
Install grille:
Install the grille.
11
Installation Operation and Maintenance Instructions
10.
11.
12.
13.
