29
NG-IOM-ATT Release 1.2
July 12, 2019
5.12 System Config
Provides functions to set the date/time, select the system configuration, and initialize the shelter FA code.
Note that
the default settings in System Configuration section are the AT&T-mandated setup for the DAC/WAC with
supplemental DX unit and no further re-configuration is required.
The AT&T RAN Support Program Office should
authorize changes to these fields.
After changing field(s) in one of the sections press the corresponding
Update
push button to activate the change(s).
The technician must then enter their User ID, which may be their name or assigned AT&T user id. This User ID is
recorded with the details of the change in the system event log. The User ID has to be entered only once during the 30
minute Wi-fi activity period. The system automatically associates this ID with any subsequent configuration changes.
Figure 31: System Config Web Page – Part One
System Date/Time
Text entry field
Enter new date/time with the format MM/DD/YYYY HH:mm then press
the
Update
push button. Note that changing the date/time requires a
controller restart and the technician is prompted to confirm or cancel
the request. After the restart the Wi-fi has to be re-enabled to connect
to the controller.
System Configuration
System Type
DAC/WAC and DX HVAC system configuration:
•
WAC Plus DX (default)
•
WAC Plus Dual DX
Note that changing the system type requires a controller restart and
the technician is prompted to confirm or cancel the request. After the
restart the Wi-fi has to be re-enabled to connect to the controller.
