-9-EN
Assembly Instructions
Caution
Do not over-inflate the tires of this unit. During inflation regularly check the pressure using a
reliable tire pressure gauge, and never exceed 30 psi.
Handle Assembly
Install Handle to the base, depress the buttons, and slide the handle assembly onto the base until locked.
Caution
Do not place hands between handle and base when assembling to prevent pinching.
Name of each part
[2] Oil filler port
[1] Pump
[5] Water
suction port
[11] Handle
[9] Frame
[4] Oil gauge
[3] Oil drain
[6] Discharge port
[7] Unloader
[8] Water drain/
air bleeder knob
[12] Speed control lever
[10] Engine
[13] Stop switch
[14] Choke lever
[15] Fuel valve
[16] Recoil starter
handle
[17] Thermal relief valve
[18] Oil sensor
