45°
45°
Before operation
Oil feeding and mixing
DANGER
CAUTION
4
After confirming the packing is in place, securely tighten nozzle pipe to grip, and wide nozzle to nozzle pipe. Tighten the screw
securely after confirming the packing to make ensure there is no water leakage. Over-tightening will cause extrusion or break the
packing. Correct tightening pressure is important.
● Make sure you use blended fuel.
● Use exclusive oil for two-cycle engine engines.
● Neither overfill nor spill the fuel on to the engine.
1. Tighten the knapsack strap
Pull the strap downward.
2. Loosen the knapsack strap
Lift strap buckle upward to
loosen.
3.Pull the chest strap to tighten.
● When removing the strainer, make the rib horizontal or
vertical.
● To fix the strainer, rotate it 45 degrees from horizontal or
vertical.
There is a possibility of fuel igniting. Make sure you observe the
following items.
● Use lead-free gasoline for automobiles for fuel.
● When feeding fuel, stop the engine and ensure no source of
fire such as cigarette is close to the area.
● Don't spill fuel. If fuel is spilled, wipe it all off at once and start
the engine after it is dry.
● When a fuel leakage is found, use the engine after repair are
done.
● After feeding fuel, make sure you close the fuel tank cap.
● When starting the engine, be more than three meters from
the supply tank.
● Read the instructions for the chemical to be used carefully
and follow the mixing method and cautions for use.
● After confirming the proper placement of the chemical cover,
close the cover securely. Otherwise, chemicals will spill and
you might be covered with them when you carry the machine
on your back.
Nozzle holder is provided in the top
of chemical tank
Assembly of nozzle
Oil feeding
Attachment and removal of a strainer
The adjustment of strap
Mixing chemicals
Wide nozzle
Rib
Rib
Strainer
Strainer
Chemical tank
Chemical tank
Nozzle pipe
Discharge port
End of spraying hose
filler opening
Close securely
Chemical tank lid
Ball cock
Grip
Spraying hose assembly
Gasoline :
Exclusive oil
50 : 1
Summary of Contents for MS0835W
Page 47: ......