l.
Cable Adjuster Sleeve
Carburetor Throttle Cam
With the air cleaner cover removed, insert the
throttle cable through the cable adjuster sleeve on
the carburetor bracket. Make sure the end of the
cable housing is seated positively in the sleeve.
l.
2.
Install the plastic tube around the throttle cable
and stop switch wires.
Connect the stop switch wires, and hold the wires
with the clamp.
2. Position the slotted fitting on the carburetor so the
recessed hole for the cable lug is away from the
cable adjuster sleeve.
Installing Trimmer Head Shield
3. Rotate the carburetor throttle cam counterclock
wise and slip the throttle cable through the slot in
the slotted fitting, making sure the cable lug drops
into the recessed hole.
4. Operate the throttle trigger a few times to make
sure that it works correctly.
5. Adjust the cable' adjuster sleeve so the stop on the
carburetor throttle cam just contacts the throttle
stop when the throttle trigger is fully depressed.
6. When the throttle cable is adjusted correctly, tight
en the locknut.
Connecting Stop Switch Wires
Stop Switch Wires
Throttle Cable
-10-
A
WARNING
POTENTIAL HAZARD
• Foreign objects can be thrown by
Trimmer.
WHAT CAN HAPPEN
• Contact with thrown objects can cause
personal injury.
HOW TO AVOID THE HAZARD
• Never operate the Trimmer without the
trimmer head shield in place.
·
A
CAUTION
POTENTIAL HAZARD
• The cutoff blade is sharp.
WHAT CAN HAPPEN
·• Contact with cutoff blade could cause
serious cuts or personal injury.
HOW TO AVOID THE HAZARD
• Keep hands, feet and clothing away from
cutoff blade.
