When cutting heavy brush or small trees, always swing
the Brushcutter from right to left. Swinging the
Brushcutter from left to right can cause the blade to
kickback.
•
Cutting Blades
I.
Use only the correct blade (Maruyama genuine
part) approved for the application and model
Brushcutter.
2.
Carefully check the condition of the blades before
and after operation.
3.
Sharpen dull blades. Replace any blade that is
worn, cracked or damaged.
4.
If a blade produces eccentric rotation or vibration,
replace the blade and the bo.ss adapter with gen
uine Maruyama parts.
Maintenance
Please see HONDA ENGINES Owner's Manual.
Gearcase
Maintenance Interval
The gearcase should be checked for lubrication after
each 30 hours of use.
Gearcase Lubrication
Bearing Lube
(PIN 211337)
/ Grease Plug
fgl/Plug Hole
f
Watch for
i
Grease here
-C!Sr'-::
Boss Adapter
Remove the cutting attachment and the boss adapter.
Clean any dirt _and debris from the area between the
boss adapter and the gearcase .. Remove the grease plug
from the side of the gearcase.
While rotating the attaching shaft, inject lithium-base
bearing lube (PIN 211337) through the plug hole until
the gearcase is full. Reinstall the boss adapter and
grease plug.
-19-
