Red Band
Strap
Optional
Bullhorn handle kit installation
IMPORTANT: Be careful not to damage the
throttle cable and stop switch wires when you
re�ove the bullhorn handles from the shipping
carton.
/ Throttle Trigger/Stop Swilch
Bullhorn Handle
Stop Switch Wires/Throttle
Cable
Screw (4)
Clamp
/
racket
i
1.
Loosen the four screws on the top of the clamp bracket.
2.
Insert the left and right bullhorn handles into the
clainp bracket. Note that the bullhorn handle with
the throttle trigger and stop switch goes on the
right-hand side of the Brushcutter.
3.
Adjust the bullhorn handles to the desired posi
tion, then tighten the four screws.
Installing Blade Shield
A
WARNING
POTENTIAL HAZARD
• Foreign objects can be thrown
by
Brushcutter.
WHAT CAN HAPPEN
• Contact with thrown objects can cause
personal injury.
HOW TO AVOID THE HAZARD
• Never operate the Brushcutter without
the blade shield in place.
Gearcase
/Blade Shield
______... I
MS x 12 Screw (4)
I.
Install the blade shield onto the gearcase.
2.
Install and tighten thefourM5 x 12 screws.
-11-
