82
72F-74E
Tightening torque:
1.2 – 1.6 kg-m (8.5 – 11.5 lb-ft)
To tighten the oil filter properly, it is
important to accurately identify the
position at which the filter gasket first
contacts the mounting surface.
5) Tighten the filter 3/4 turn from the point
of contact with the mounting surface. [or
to 1.2 – 1.6 kg-m (8.5 – 11.5 lb-ft)] using
an oil filter wrench.
To prevent oil leakage, make sure that
the oil filter is tight, but do not
overtighten it.
Refill with oil and check for leaks.
1) Pour 3.1 litres of oil through the filler
hole and install the filler cap.
2) Start the engine and look carefully for
leaks at the oil filter and drain plug. Run
the engine at various speeds for at least
5 minutes.
3) Stop the engine and wait for 5 minutes.
Check the oil level again and add oil if
necessary. Check for leaks again.
When replacing the oil filter, it is
recommended that you use a genuine
MARUTI replacement filter.
Oil leaks from around the oil filter or
drain plug indicate incorrect
installation or gasket damage. If you
find any leaks or are not sure that the
filter has been properly tightened,
have the vehicle inspected by your
MARUTI dealer.
w
w
w
w
w
CAUTION
INSPECTION AND MAINTENANCE
9-11
w
w
w
w
w
CAUTION
w
w
w
w
w
CAUTION
w
w
w
w
w
CAUTION
70F-07-011E
Summary of Contents for ZEN-AX
