78
72F-74E
• All maintenance should be carried
out with the ignition switch in the
“OFF” position and the car parked
securely on the level ground unless
otherwise specified.
• If you are in any way unsure of your
ability to undertake a task, then do
not start it but contact your Maruti
dealer to perform the work for you.
WATER PUMP BELT
6 - 8 mm (0.24 - 0.31 in.)
The belt should also be examined to ensure
that it is not damaged. If the belt needs to
be replaced or adjusted, have it done by
your MARUTI dealer.
When the engine is running, keep
hands, hair, clothing, tools, etc. away
from the fan and water pump belt.
Even though the fan may not be
moving, it can automatically turn on
without warning.
Make sure the water pump belt tension is
correct. If the belt is too loose, insufficient
battery charging, engine overheating, or
excessive belt wear can result. When you
press the belt with your thumb midway
between the pulleys, the belt deflection
should be within the specification below.
INSPECTION AND MAINTENANCE
9-7
w
w
w
w
w
WARNING
w
w
w
w
w
WARNING
70F-07-003E
Summary of Contents for ZEN-AX
