MARUTI SUZUKI Automobile, User Manual

Page: 82 / 177

81
Folding Rear Seats (if equipped)
The rear seat(s) of your vehicle can be
folded forward to provide additional cargo
space.
To fold the rear seats forward:
62J059
1) Hook the webbing and the latch plate
of the outboard lap-shoulder belt in the
belt hangers.
CAUTION
• When you move a seatback, make
sure both the latch plate and the
belt webbing are hooked in the
seat belt hangers so the seat belts
are not caught by the seatback,
seat hinge, or seat latch. This helps
prevent damage to the belt system.
(Continued)
OTHER CONTROLS AND EQUIPMENT
4-4
CAUTION
(Continued)
• When you hook the belt webbing
and latch plate into the seat belt
hanger, make sure the latch plate
is on the obverse side of the belt
webbing as shown in the
illustration.
• Make sure the belt webbing is not
twisted.
2) Lower the adjustable head restraint fully
(if equipped).
75J023
3) Pull the both release straps on the top
of the seatback, and fold the seatback
forward.
CAUTION
After folding the rear seatback
forward, do not allow any foreign
material to enter the lock opening.
This may cause damage to the inside
of the lock and prevent the seatback
from being locked securely.
Luggage or other cargo should be
stowed in the luggage compartment
with the rear seat in an upright
position, whenever possible. If you
need to carry cargo in the passenger
compartment with the rear seat back
folded forward, be sure to secure the
cargo or it may be thrown about,
causing injury. Never pile cargo
higher than the seatbacks.