MARUTI SUZUKI Automobile User Manual Download Page 3 | Manualshive

Page: 3 / 177

background image

3

FOREWORD

This manual is an essential part of your
vehicle and should remain with the vehicle
when resold or otherwise transferred to a
new owner or operator. Please read this
manual carefully before operating your new
MARUTI SUZUKI and review the manual
from time to time. It contains important
information on safety, operation and
maintenance. You are invited to avail the
three Free Inspection Ser vices as
described in the manual. Three free
inspection coupons are attached to this
manual. Please show this manual to your
dealer while you take your MARUTI
SUZUKI for any Service.
To prolong the life of your vehicle and
reduce maintenance cost, the periodic
maintenance must be carried out accord-
ing to “PERIODIC MAINTENANCE
SCHEDULE” described in “INSPECTION
AND MAINTENANCE” section of this
manual. It is essential for preventing trouble
and accidents to ensure your satisfaction
and safety.
Daily inspection and care as per “DAILY
INSPECTION CHECKLIST” described in
the “INSPECTION AND MAINTENANCE”
section of this manual is essential for

prolonging the life of the vehicle and for
safe driving.
MARUTI SUZUKI INDIA LIMITED believes
in conservation and protection of Earth’s
natural resources.
To that end, we encourage every vehicle
owner to recycle, trade-in or properly
dispose of, as appropriate, used Engine
Oil, coolant and other fluids, batteries and
tyres etc.

MARUTI SUZUKI INDIA LIMITED

All information in this manual is based
on the latest product information avail-
able at the time of publication. Due to
improvements or other changes, there
may be discrepancies between informa-
tion in this manual and your vehicle.
MARUTI SUZUKI INDIA LIMITED
reserves the right to make production
changes at any time, without notice and
without incurring any obligation to make
the same or similar changes to vehicles
previously built or sold.

This vehicle may not comply with stan-
dards or regulations of other countries.
Before attempting to register this vehi-
cle in any other country, check all
applicable regulations and make any
necessary modifications.

0-1

«
1
2
3
4
5
...
»

Summary of Contents for Automobile


















































































































































































Reviews:

No comments

Related manuals for Automobile

Brand: Jabra Pages: 10

Brand: Taffio Pages: 8

Brand: Mercedes-Benz Pages: 373

Brand: Honda Pages: 32

Brand: Veigel Pages: 24

Brand: Cellular Line Pages: 25

Brand: Porsche Pages: 313

Brand: Meta System Pages: 22

2005 JR41 Stratus

Brand: Dodge Pages: 293

Brand: Tesla Pages: 274

Brand: Kia Pages: 58

Brand: Ratio Pages: 12

Brand: Horn Tools Pages: 8

Brand: Huf Pages: 6

Brand: Subaru Pages: 44

Brand: Roadmaster Pages: 4

Brand: Pogo Pages: 40

Brand: Subaru Pages: 399

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands