MARUTI SUZUKI Automobile User Manual Download Page 156

Page: 156 / 177

155

For rear wipers:

80G146

1) Hold the wiper arm away from the

window.

2) Remove the wiper frame from the arm

as shown.

3) Slide the blade out as shown.

INSPECTION AND MAINTENANCE

8-36

Removal

60A260

Installation

54G132

(1) Locked end

54G135

4) If the new blade is provided without

the two metal retainers (1) , move them
from the old blade to the new one
taking note of its bending form.

5) Install the new blade in the reverse

order of removal, with the locked end
positioned toward the wiper arm. Make
sure the blade is properly retained by
all the hooks. Lock the blade end into
place.

6) Reinstall wiper frame to arm, making

sure that the lock lever is snapped
securely into the arm.

Summary of Contents for Automobile


















































































































































































Search results

Summary of Contents for Automobile

Reviews:

Related manuals for Automobile

Brands by name

Popular brands

MARUTI SUZUKI Automobile, User Manual

Search results

Summary of Contents for Automobile

Reviews:

Related manuals for Automobile

Brands by name

Popular brands