w
ww.milwaukeeinst.com
7
SETUP
Setup is used to view or change the instrument parameters.
To enter setup press SHIFT+SETUP when the meter is in measure-
ment mode.
"Set" is displayed on the upper LCD. The lower LCD displays the blinking code of the
current setup item.
Select the desired setup item using the
▲
or
▼
key.
Press SHIFT+CFM to confirm.
Note:
Note:
Note:
Note:
Note: If SHIFT+SETUP are pressed before item confirmation, the meter will escape and
return to measurement mode.
Once the desired setup item has been selected, its current value blinks (if it is a
changeable parameter).
