w
ww.milwaukeeinst.com
11
The LCD will show the current reading together with a blinking "H" tag.
When measurement becomes stable, the "H" symbol stops blinking and the measured
value is frozen on the display.
To exit this mode and return to normal operations, press again SHIFT+HOLD.
Note: While in Auto Endpoint mode, current measurement (both stable and unstable)
can be stored in the meter memory by pressing the MEM key.
Note: While in Auto Endpoint mode, calibration mode can not be entered and it is not
allowed to change the temperature compensation and the range options.
TEMPERATURE COMPENSATION
Three options of compensating temperature are available:
Automatic (Atc): The probe has a built-in temperature sensor; the value of the tempera-
ture is used to automatically compensate the EC/TDS reading. This is the default option.
Manual (Mtc): The temperature value, shown on the lower LCD, can be manually set by
the user with the up and down arrow keys. The "°C" symbol blinks when this option is
active.
No Compensation (notc): The temperature reading shown on the lower LCD is not
taken into account. The reading displayed on the upper LCD is the actual EC or TDS
value. The "%TC" symbol blinks when this option is active.
To select the desired option press the ATC key until the option is
briefly displayed on the LCD.
