www.milwaukee
inst.com
23
SETUP
Setup mode allows viewing and modifying the following parameters:
• Cell Constant
• TDS Factor
• Temperature Coefficient
• Reference Temperature
• Current Time (hh:mm)
• Current Date (MM.DD.YYYY)
• Beep Status
• Baud Rate (serial communication)
• Instrument ID
• Temperature Unit
To enter SETUP mode, press and hold the SETUP key for about 2 seconds while in
normal measurement mode.
Select the desired setup parameter using the UP and DOWN arrow keys.
Press the CAL key if you want to change the item value. The selected item (e.g. hour, in
setting up the correct time) and “ACCEPT” tag will start blinking.
Press the arrow keys to change the displayed value.
If there is another item to be set (e.g. minutes), press the RANGE/FIXED key. The other
item will start blinking.
