manualshive.com logo in svg

Martindale Electric HPAT600/2 HANDYPAT, Instruction Manual

Share
Download
Martindale Electric HPAT600/2 HANDYPAT Instruction Manual Download Page 25

        

Class ITest 
Connection

Testing in Manual Mode

u

   Press 

CLASS I

 to select the Class I appliance test and 

display the diagram screen.

u

   Press 

OK

 for the HPAT600 to display the VISUAL 

CHECK screen. 

u

   If any visual or fuse checks fail, select 

Fail 

and press 

OK

 to abort the test and return to the select test 

screen.

u

   If all visual and fuse checks pass, select 

Pass all

 and 

press 

OK

 for the HPAT600 to display the test screen 

and perform the fuse check. 

If 

‘FAIL’

 is displayed after the fuse check, refer to 3.11. 

(Fuse Check/Simulated Load Failure)

u

   Press

 OK

 for the HPAT600 to perform the Class I 

earth continuity measurement.

u

   If 

‘FAIL’

 is displayed after the Class I earth continuity 

measurement, refer to 3.12. (Earth Continuity/
Insulation Failure)

u

   Press 

OK

 for the HPAT600 to perform the Class I 

insulation measurement.

u

   If 

‘FAIL’

 is displayed after the Class I insulation 

measurement, refer to 3.12. (Earth Continuity/
Insulation Failure)

21

Summary of Contents for HPAT600/2 HANDYPAT

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands