2.16 Recalling Test Data from Memory
Test data that has previously been saved in the
HPAT600 memory can be recalled and displayed on the
RECALL MEMORY screen.
To recall test data enter the MENU screen, use
hi
to select
Recall Memory
and press
OK
to enter the
RECALL MEMORY screen. Mem
XXX
will be displayed.
With XXX selected, use
hi
to scroll to the required
memory location number with the stored test data to
be viewed. Use
f
to exit the RECALL MEMORY and
MENU screens.
Note: The highest memory location with stored data
will be displayed on entering the RECALL MEMORY
screen. This will normally be the last appliance tested.
However, after individual memory locations have been
deleted (see 2.18), the lowest available vacant memory
location will be used to store new data, so the user
must make appropriate notes of where actual data has
been stored for a particular appliance.
2.17 Memory Empty Screen
If no test data has been stored in memory, attempting to
enter the RECALL MEMORY screen (Refer to 2.16) will
cause the MEMORY EMPTY screen to be displayed. To
exit from this screen press OK.
2.18 Deleting Individual Test Data in Memory
When recalling stored test data (Refer to 2.16) the
stored test data in any memory location may be deleted
individually. The stored test data in other memory
locations will
NOT
be deleted.
12
