4
Step 4
Step 5
Attach Tilt Mechanism and Hinges
Attach Top Drawer
A)
Attach Tilt mechanism (Part 11 ) to the base. Locate the 2 holes on the top side of cross support (Part 6 ) .
Secure Tilt Mechanism to this cross support using 2 each 6x28mm bolts (Part 15 ) & 2 each locking nuts (Part 21 ).
Position locking nuts to the underside of cross supports (Part 6 ). Use wrench (Part 35 ) to hold nuts while tightening
down Hex Bolts.
B)
Attach 2 hinges (Part 13 ) to front edge of cross support (Part 5 ) by lining up holes in hinge and holes in
cross support bar (Part 13 ). Secure using 2 each 4x14mm screw (Part 19 ) per hinge. Tighten with Phillips head
screwdriver.
Line up the drawer top (Part 9 ) to the specified holes on table base. Once drawer top is positioned correctly, secure top
using 4 of 6x28mm bolts (Part 15 ) and 4 of the metal washers (Part 32 ). The metal washers should be positioned
between drawer top and table base.
15
21
19
19
11
13
13
32
15
9
June2013
