7
D)
Insert cams (Part 22 ) into the holes found on each side panel, making sure the holes of the T-nuts (Part 22 )
line up with the holes on the outer edge of the drawer sides.
E)
Attach sides of drawers (Parts 27 & 28 ) to the drawer front (Part 26 ) by inserting threaded connection
pins (Part 20 ) into the holes on the outside edge of the drawer sides. *Please note that the grooves in each side must be
lined up with each other to allow the drawer bottom to be installed. To secure, tighten the T-nuts (Part 22 ) with Philipps
head screwdriver until tight.
F)
Attach drawer handle (Part 12 ) to front drawer panel using 2 of 4x20mm bolts (Part 17 ).
Step 8
Attaching Pencil Ledge and Drawer Stopper
Attach pencil ledge (Part 23 ) to the front edge of table top, using two 4x12mm screws (Part 18 ).
After sliding drawer to table, attach drawer stopper (Part 24 ) to the left side of drawer, using 4x12mm screw (Part 18 )
and tighten it with Phillips head screwdriver.
22
18
18 24
20
20
17
22
26
12
27
28
23
June2013