Martin SQC2, Installation Instructions Manual

Page: 10 / 69

© Martin Engineering GmbH 8 M3682UK-09/17
Description of the product
3 Description of the product
3.1 Design and function
With its individually spring-loaded tungsten-carbide blades, the
secondary cleaner provides effective cleaning without damaging
either the conveyor belt, possible splices or the cleaner itself. The
rubber buffers of the tungsten-carbide blades cushion impact on the
one hand and maintain the required cleaning pressure on the other
hand.
3.2 Tensioners
The secondary cleaner and its specially developed Martin
Engineering Inline Reversing tensioners offer the best possible
results and correspond to the general state of the art.
The SQC2™ secondary cleaner can be operated exclusively with
the following tensioner:
• MARTIN
®
SQC2™ tensioner,
part no. SQC2-35701-XX
3.3 Type designation
Den MARTIN
®
SQC2™ secondary cleaner is available in three
different designs
• with aluminium cartridges for general usage.
• without aluminium cartridges for additional usage in
explosive areas where no aluminium is permitted.
• as a miniature design for tight installation spaces.
NOTE
An unfavourably or improperly installed product can disrupt the
conveyor process or contaminate the bulk material to be
transported.
The owner-operator is responsible for taking the required
countermeasures.
In the case of applications with contaminants Martin Engineering
or one of its representatives can assist with the positioning or with
special solutions.